Selective Plating
& Electro Brush Plating

Reduce Downtime, Reduce Costs.

A fast, cost-effective method for resizing, rebuilding and resurfacing metal components.

The process of selective brush plating can be used to plate, anodise and electropolish without using an immersion tank. Over the past 23 years, this versatile process has been successfully used in thousands of repair and OEM applications over a wide range of industries.

The most common applications for the process are:

Hydraulic Ram Repair

Electrical arc, collision and scoring damage can be repaired without complete disassembly of components. Repair is permanent and ready for immediate use, saving costly downtime.
Resizing / Rebuilding

Components that are out of tolerance due to wear or corrosion can be restored to factory original dimensions. Components that are damaged (dents, gouges, grooves etc) or mismachined can be repaired and resized.
Resurfacing

Our process can restore or improve surface properties such as electrical conductivity, corrosion resistance, hardness and wear resistance.
The Selective Plating process is portable, so we can perform the service at your facility or at our service factory. Before you scrap or replace your metal component – or finalise the design of your OEM product – call us to discuss your application.

Experience in all Major Industries

Printing Industry

Purpose: Restore surface, Improve appearance, resist corrosive atmosphere, cut disassembly costs, copperizing, defect repair.


Components: Plate cylinder, ink drums, blanket roll cylinders, guide rolls, saddles, housings.

Machining & Machine Tool Industry

Purpose: Repair machining errors, reduce seizing and scuffing, improve surface hardness, provide corrosion protection, resist foreign particle action, provide minute surface porosity.


Components: Gear box bores, mismachined diameters, bearing housing and journals, hydraulic press sleeves, pillow blocks.

Navy & Commercial, Hydraulic Rams & Marine Industry

Purpose: Repair Corrosion damage, restore design size, correct machining errors, repair scoring, resize worn areas.


Components: Hydraulic cylinders, reduction gears, pump impellers, hull fittings, steam valves, casing flanges, MG sets, bearing areas

Mold & Die Industry

Purpose: Resizing for dimension, repair worn areas, reducing product size, enhance mold release, prevent acid attack, improve corrosion resistance.


Components: Parting lines, gates, cavities, ejection pins, stripper rings, molding screens.

Aerospace & Aircraft Industry

Purpose: Reduce fretting, improve wear resistance, improve high temperature hydrogen embrittlement cadmium and zinc-nickel.


Components: Shafts, spacers, landing gear components, vanes, engine cases, wing spar, nozzle supports.

Power Generation & Distribution Industry

Purpose: Lower contact resistance, increase wearability, resist environmental corrosion, reduce temperature increases, increase solderability.


Components: Communicators, circuit contacts, generator components, bus bars, end bell housings, armatures, turbine components, valve components.

Approved - Through numerous commercial, industrial and military specifications.

Portable - alternative when a stationary part is too difficult or costly to move.

Process - With excellent adhesion and little or no need for finishing.

Provides - Coatings of pure metals, alloys and anodising plus hard chrome.

Pinpoint - Localised plating, anodising and electropolishing without excessive masking.

Plating - You can count on anywhere, anytime.